Atlanta, GA.
Camera, edge computer, 5G cellular connectivity, light, speaker, battery, and an optional SCADA board, all housed in a durable polycarbonate enclosure built for unattended sites.
5G + LTE
Cellular, Fallback Built-in
SVADA™
Supervisory Video & Data Acquisition
5 MP
Days to weeks
Battery Backup
The unit carries the camera, edge computer, radio, light, speaker and microphone, battery and an optional SCADA board. The service carries the cellular path, portal, notifications and archive.
Edge computer on site
5G radio with LTE fallback
Wide angle pad camera
Thermal motion detector
Battery days to weeks
Weatherproof housing
01
Real-time video for up to 6 cameras, with months of local storage.
02
Up to 30x faster than 4G with half the latency, for smooth video.
03
Room to expand to 6 video cameras from the one install.
04
Built in, 15 yard range, feeding the same event package.
05
4 analog and 12 digital points over one RJ45 cable to the housing.
Recorded when a SCADA alarm occurs or a person enters a defined alert area.
A bag, a shadow or a headlight is never mistaken for a person.
Man down, inactivity and work verification, never watching crews work.
SCADA values burned into the frame so the clip is the record.
An action an operator deliberately chooses, never the system’s default state.
Pad, hatch, cabinet and gate, all captured in a single frame.
Every image on this site was captured by a Sentry unit at a working customer or test site, including clear night footage that older cameras miss.
NDAA compliant cameras and electronics
Floats, level, pump run, high level contact, digital and analog inputs. Sits beside a PLC, publishing over MQTT and Sparkplug B.
Extra outdoor cameras cover a generator, fuel tank, hatch, or driveway the first lens misses. Same edge computer, same monthly path.
Wireless sensors and perimeter devices feed the same event package: time, picture, SCADA, and the sensor that tripped.
The portal carries map, status, alarms, event video, device health and permissions, and it is built for a phone at 2 a.m. MQTT and Sparkplug B into the existing HMI, one glass, not a second login.
What is inside the housing, how it connects without site internet, and what the monthly fee covers.
A 5 megapixel Ultra Low Light Camera, an onboard edge computer running AI human form detection and pose estimation, a PIR motion sensor, 5G cellular with LTE fallback, a light, a speaker, battery backup, and an optional SCADA board. Everything is housed in a durable polycarbonate enclosure built for unattended outdoor sites.
No. Sentry transmits over 5G cellular with automatic LTE fallback. It is designed for remote lift stations, pump houses, tanks, and wells that have no existing network infrastructure.
Sentry is not a camera accessory for a specific SCADA platform. It works alongside any web SCADA system, including VTScada, AVEVA, and Ignition SCADA, by reading your existing field instruments through standard wired inputs. Your operators keep using whatever SCADA interface they already trust.
No. Sentry is event based and never runs a full time stream. It records only when an alarm trips or a person enters a defined alert area. This keeps cellular costs low, reduces noise, and means the clips that do arrive always matter.
All event video, stills, and SCADA snapshots are stored for one year. The same file that helped you make a 2 a.m. decision is still there for a council question, an insurance review, or an EPA inquiry.
One flat monthly fee covers the cellular path, the customer portal, voice, SMS, and email alerts, event video and stills for one year, health checks on the alert path, and firmware and device support. No per camera licensing and no separate cellular contract.
Want pricing for your own sites? Ask our team.
Enter your work email to get two spec sheets covering both ways to deploy Sentry: with your existing HMI or on the Memoreyes portal.
