Atlanta, GA.
Sentry records when an alarm occurs or a person enters the alert area.It overlays your SCADA values on the video and sends your team a short call with the video evidence they need to respond.
SVADA™
Supervisory Video & Data Acquisition
5G + LTE
Fallback Built-in
Under 1 hr
Typical Install
Event based
Never a Full Time Stream
01
110 degree field of view captures the full site without warping. Fewer units needed than traditional 60 to 70 degree trail cams.
02
Runs AI human form detection and pose estimation directly on the device. No cloud round trip, no latency, no internet dependency.
03
Passive infrared detects heat and movement as the first trigger. Activates the camera only when something enters the field.
04
Connects to your existing field instruments through standard analog and digital inputs. Reads pump status, pressure, and level data directly.
First install, Livingston County
Crew on site, 24 March 2022 · 0:05
You define which zones matter. Roads, tree lines, and wildlife paths are excluded. Motion outside the alert zone is ignored entirely.
A bag, a headlight, a fox, a shadow: none of these pass. Only confirmed human forms trigger the next step.
Classifies the activity once a human form is confirmed. Standing upright near equipment is one event. Person on the ground with no movement is another.
Once the edge computer confirms a real event, it builds a complete evidence package and sends it over cellular. Here is the path.
Sentry sits beside the system you already trust and adds the one thing it was always missing: a picture with context.
Short video clip and HD stills with SCADA values burned into the frame. Site name, time, pump status, and level in every file.
Sent over 5G cellular with automatic LTE fallback.
Every confirmed event replaces a blind dispatch, so your labor spend stays on work that actually needs it.
How it decides what is real, how fast the alert arrives, and what happens when 5G is weak.
Three layers of filtering happen at the edge before your phone rings. First, custom alert areas exclude roads, tree lines, and wildlife paths. Second, AI human form detection confirms whether the trigger is a person or noise. Third, pose estimation classifies the activity, covering man down detection and inactivity. Only verified human events reach your team.
Seconds. The edge computer processes everything on the device, builds the evidence package, and transmits it over 5G cellular. Your team gets a voice call, an SMS, and an email at the same time, with the clip attached.
No. Sentry transmits over 5G cellular with automatic LTE fallback, so it needs no Wi-Fi or site internet.
No. Sentry reads your SCADA values through standard analog and digital inputs and overlays them on the video frame. Your operators keep the control system and interface they already trust. Sentry adds the picture, not a new control path.
Mission Communications and Omnisite provide SCADA telemetry and alarm notification for remote water and wastewater sites. Sentry does not replace them. It adds the visual and human detection layer that telemetry alone cannot provide. If your current system tells you a level is high, Sentry shows you why.
The unit automatically falls back to LTE. No manual switching, no configuration change. Sentry is designed for remote locations where connectivity is limited.
Under an hour for a typical site. Mount the unit, connect power, optionally wire SCADA inputs, configure alert areas through the customer portal, and run a test trigger. No specialized contractors required.
Want to see the alert path on your own sites? Start with a pilot.
No per camera licensing, no separate cellular contract, no surprise line items. One flat monthly fee covers the hardware, the connectivity, the portal, and one year of stored evidence.
Enter your work email to get two spec sheets covering both ways to deploy Sentry: with your existing HMI or on the Memoreyes portal.
